Shadow6290
Member
Hey everyone,
This is my first post here so if it's in the wrong place or more info is needed please let me know. I bought the Teensy Prop Shield along with the Teensy 4.1. I've run into an issue with accessing the SPI Flash Chip on the Prop Shield. None of the example sketches from the SerialFlash library seem to work. CS for the chip is on pin 6. MISO,MOSI, and SCK are connected (I managed to run a strip of DotStar LED's from the Prop Shield with no issues so the connections are fine there). I soldered the headers on it myself, I quadruple checked to make sure there were no cold solder joints on those pins. Is there something I'm missing? Did I somehow get a bum chip? User error is still a possibility but I've checked everything I can think of. Any help would be greatly appreciated!!!!
This is my first post here so if it's in the wrong place or more info is needed please let me know. I bought the Teensy Prop Shield along with the Teensy 4.1. I've run into an issue with accessing the SPI Flash Chip on the Prop Shield. None of the example sketches from the SerialFlash library seem to work. CS for the chip is on pin 6. MISO,MOSI, and SCK are connected (I managed to run a strip of DotStar LED's from the Prop Shield with no issues so the connections are fine there). I soldered the headers on it myself, I quadruple checked to make sure there were no cold solder joints on those pins. Is there something I'm missing? Did I somehow get a bum chip? User error is still a possibility but I've checked everything I can think of. Any help would be greatly appreciated!!!!