Teensy4.1 ethernet kit

Status
Not open for further replies.
T

the_boss

Member
Hi everyone.

I have a teensy4.1 and got my ethernet kit https://www.pjrc.com/store/ethernet_kit.html
I solder it and connected to my teensy but the light on the ethernet port didnt turned on, is it normal or should it turn on. I found this test program teensyduino native ethernet
https://github.com/vjmuzik/NativeEthernet
but when I run the program I got this response "Link status: OFF" and it does not matter if the ethernet kit and cable is connected to the teensy or not. Do I need to initiate the teensy or what to do :)
 
It should be controlled by the library, but make sure you are on the network. Confirm by pinging the teensy's IP.
 
Status
Not open for further replies.
Back
Top