I am not entirely sure if I want to develop a custom pcb yet for an upcoming project or just use a teensy 4.1 board instead.
But I was wondering if it is possible to use a MIMXRT1062DVJ6B instead of MIMXRT1062DVJ6A for a custom teensy 4.1 pcb with the bootloader chip from prjc.
Getting a hold of the A revision is impossible at the moment. Do any other chips from the imxrt1060 range also work in conjunction with the mkl02 chip?
The 1061 for example looks identical but it does not support the LCD/CSI/PXP interfaces. If I do not need these interfaces will it be an option to use this chip as well for a custom pcb?
But I was wondering if it is possible to use a MIMXRT1062DVJ6B instead of MIMXRT1062DVJ6A for a custom teensy 4.1 pcb with the bootloader chip from prjc.
Getting a hold of the A revision is impossible at the moment. Do any other chips from the imxrt1060 range also work in conjunction with the mkl02 chip?
The 1061 for example looks identical but it does not support the LCD/CSI/PXP interfaces. If I do not need these interfaces will it be an option to use this chip as well for a custom pcb?