@KurtE
Yep it would be fun at some point - I was actually thinking of stereo vision
But think maybe we need to finish the base version first - going to go ahead and push what I have to the branch But first want to try it again with audio
Cool, see about updating and giving it a look. Is there a T_4.1 pinout for camera noted somewhere - from that AMZN adapter?
Looks like you have been busy will try to play some later.
I would say go for it and back to master.
void setupPR() {
Serial.println("\n" __FILE__ " " __DATE__ " " __TIME__);
[B]//isrPrime_it.priority(255);[/B]
Should be seen g_continuous gone and the DMA callback gone. Maybe I forgot to update it? I will have to take a look. Having a problem with 8bit mode on the BB with message DMA Time out trying to figure it out.defragster said:Doing CodeCompare of "...\HM01B0_example2.ino" and "...\HM01B0_example1.ino" - only diff is addition of 't'? Not seeing any change to "Example1 sketch - removed redundant code so only flexio is involved...", and the issue is with FLEXio
That Update must be a local change not on github.
I've seen some DMA timeouts - unplugging and waiting and other stuff ... wasn't sure if it was me or my selected options.
PJRC.BB on new USB port and fine since p#661 restarts? Moving back to the other port it now shows up? Something went odd ??? Not restarted machine ...
redraw rate = 15.34 Hz
LP#=231011 Pri#=67682 last Pri=107510539 ms=20615 ipCyc%=35.36
const int PrPS=1000 * 220; // pick number 30K to 120K, 220K or more net completed depends on priRestart val and tableSize
#define usPTimer 1000000.0/PrPS // intervalTimer us freq val
#define priRestart 107361011 // Larger Primes takes longer :: 65537 // 53680457 // 107361011 // 107375183 // 2147503639 // 2147712181
redraw rate = 7.67 Hz
LP#=685211 Pri#=117260 last Pri=107595517 ms=938968 ipCyc%=61.23
LP#=884564 Pri#=117287 last Pri=107595583 ms=16228 ipCyc%=61.21
Hardfault.
Return Address: 0x8A87848C
Faulted from exception.
(IACCVIOL) Instruction Access Violation
Morning all,
Any thoughts? - Occasionally
Sorry have been distracted with some other stuff...
I know I should read the stuff to figure it out, but what do I need to setup to do Zelda? i.e. does it need extra hardware... Again probably can figure that out,
but sort of going a bit slow today and only had a few sips of coffee
new FlexIO data
redraw rate = 30.69 Hz
if (g_new_flexio_data) {
Serial.println("new FlexIO data");
[B][COLOR="#FF0000"] if (0) {
tft.setOrigin(-2, -2);
tft.writeRect8BPP(0, 0, FRAME_WIDTH, FRAME_HEIGHT, (uint8_t *)g_new_flexio_data, mono_palette);
tft.setOrigin(0, 0);
tft.updateScreenAsync();
}
[/COLOR][/B]
new FlexIO data
LP#=3014046 Pri#=117287 last Pri=107595583 ms=18158 ipCyc%=61.19
new FlexIO data
new FlexIO data
new FlexIO data
new FlexIO data
LP#=926826841 Pri#=22259 last Pri=976828735 ms=18349 ipCyc%=11.68
[B]HM01B0 Camera Test
HM01B0_FLEXIO_CUSTOM_LIKE_8_BIT
[/B]------------------
SENSOR DETECTED :-) MODEL HM01B0
OSC_CLK_DIV: 0x2A
ImageSize (w,h): 324, 244
START Fill Cache :: 3221
END Fill Cache :: Last is 82813 @ 3268
[B]Return Address: 0x2025BE00[/B]
Faulted from exception.
(IACCVIOL) Instruction Access Violation
Custom - Flexio is 8 bit mode
8Bit FlexIO
HM01B0 Camera Test
HM01B0_FLEXIO_CUSTOM_LIKE_8_BIT
------------------
SENSOR DETECTED :-) MODEL HM01B0
OSC_CLK_DIV: 0x2A
ImageSize (w,h): 324, 244
START Fill Cache :: 13333
END Fill Cache :: Last is 82813 @ 13380
Hardfault.
[B]Return Address: 0x46484D4A[/B]
Faulted from exception.
...
[B]// And these[/B]
Return Address: 0x4545433E
Return Address: 0x494C4744
Return Address: 0x42404044
Return Address: 0x76787674
...
(IACCVIOL) Instruction Access Violation