Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Reset button Teensy LC

  1. #1
    Junior Member
    Join Date
    Apr 2021
    Posts
    3

    Reset button Teensy LC

    Hi everyone,

    I'm new to using teensy and would like to house my project in a plastic enclosure. Problem is if I need to change something in the code and upload it to the board I need to press the reset button every time. Is there a way move it to the exterior of the housing box, is there a dedicated pin to do so?

    Thanks for all the help you can provide

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    24,269
    Sure, just connect the button to the Program pin and GND.

  3. #3
    Junior Member
    Join Date
    Apr 2021
    Posts
    3
    Awesome! Thanks for the quick reply

  4. #4
    Junior Member
    Join Date
    Apr 2021
    Posts
    3
    Should I use a resistor?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •