MiguelRodmen
Member
Hello
I'm working with a Teensy 4.0 to run a 3 minutes countdown timer, showing it on a Nextion(NX4832T035_011) display, I used to run it on Arduino Uno and Mega and everything worked pretty well, but I decided to change the project to Teensy, the issue is that when I run the timer, the teensy gets frozen and I need to remove the power source or press the programming button, sometimes it freezes when the time is up, some other times when the time is running (usually at minute 1:38), I've removed everything else on my code to only run Nextion and countdown timer and it stills freezing, also I've tried adding Serial2.flush(), waiting for a while to refresh my display, removing debug serial, run it with an external power source and no computer, changing the teensy many times, reinstalling everything regarding Arduino and Teensy, but nothing seems to work.
Software: Arduino 1.8.13 & Teensyduino 1.53
Hardware: Teensy 4.0
Regards,
Miguel
I'm working with a Teensy 4.0 to run a 3 minutes countdown timer, showing it on a Nextion(NX4832T035_011) display, I used to run it on Arduino Uno and Mega and everything worked pretty well, but I decided to change the project to Teensy, the issue is that when I run the timer, the teensy gets frozen and I need to remove the power source or press the programming button, sometimes it freezes when the time is up, some other times when the time is running (usually at minute 1:38), I've removed everything else on my code to only run Nextion and countdown timer and it stills freezing, also I've tried adding Serial2.flush(), waiting for a while to refresh my display, removing debug serial, run it with an external power source and no computer, changing the teensy many times, reinstalling everything regarding Arduino and Teensy, but nothing seems to work.
Software: Arduino 1.8.13 & Teensyduino 1.53
Hardware: Teensy 4.0
Regards,
Miguel