Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Headphone Pad Measurments Not On Mechanical Drawing - Audio Shield

  1. #1
    Junior Member lemmings's Avatar
    Join Date
    Apr 2021
    Location
    Vancouver, Canada
    Posts
    19

    Headphone Pad Measurments Not On Mechanical Drawing - Audio Shield

    Hey does anyone have the dimensions for the headphone pad holes on the Audio Shield? These are not actually included on the Eagle footprint file(s) that was provided on the Audio Shield page. I'm making a custom teensy synth but I want to use a 1/4" headphone jack on my project PCB instead of the provided 1/8". From the image it's also unclear if they are offset on the x-axis from the main pins or not, and they look like they are probably 2.54mm apart, but also unclear from the image. Thank you!

    Click image for larger version. 

Name:	teensy4_audio_front.jpg 
Views:	8 
Size:	125.8 KB 
ID:	24912

  2. #2
    Junior Member lemmings's Avatar
    Join Date
    Apr 2021
    Location
    Vancouver, Canada
    Posts
    19
    Currently estimating that these pads are 0.45" directly below pins 1 and 2 on the audio shield.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •