I have a couple devices that have serial out for data. One has a baud rate of 38400 maximum and the other needs to run at 921600 minimum. Serial data is coming in in ~10hz chunks and are asynchronous between the two sources.
1) Can the Teensy 3.5 have two different baud rates set for the serial in simultaneously (different serial inputs on teensy)?
2) Am I able to log both data streams in two separate files on the SD card or can the teensy only have one file open at a time?
I'd be using the MAX3323 chip to convert from RS232 sources to the 3.5's TTL signals.
I've used the teensy for analog datalogging to the SD before but this new situation is more complex.
1) Can the Teensy 3.5 have two different baud rates set for the serial in simultaneously (different serial inputs on teensy)?
2) Am I able to log both data streams in two separate files on the SD card or can the teensy only have one file open at a time?
I'd be using the MAX3323 chip to convert from RS232 sources to the 3.5's TTL signals.
I've used the teensy for analog datalogging to the SD before but this new situation is more complex.