So i have developed a POE Board for the Teensy 4.1 and it works great provided i force the POE to ON at the Switch or use a dumb power injector.
It will also work if i set it to auto at the switch however it then shuts off because my power use is so low it thinks there is a problem
Basically the board plus sensors and the Teensy 4.1 are consuming about 54ma and i need the consumption to be at least 200ma
I need some help with a circuit that can dump that excess power as heat.
I'd appreciate any pointers.
Thanks
Tom
It will also work if i set it to auto at the switch however it then shuts off because my power use is so low it thinks there is a problem
Basically the board plus sensors and the Teensy 4.1 are consuming about 54ma and i need the consumption to be at least 200ma
I need some help with a circuit that can dump that excess power as heat.
I'd appreciate any pointers.
Thanks
Tom