Thank you for this information about theses pins and for IDE do you know if I can use Visual Studio with Visual micro to work with this TEENSY card ? Which IDE you use for TEENSY cards
Best to start with and be able to use the Arduino IDE as it is supported directly - and is the common denominator for all posts and sketches when questions arise. It is also straightforward to install a supported version from Arduino downloads (no daily builds only current or selective past releases, and not the Windows store or other custom version) then TeensyDuino.
Yes I can see Arduino IDE for starting but I would like to find a tool more efficient to do JTAG/DEBUG (or something) because it is a project with a lot of criticism. That why at the beginning of this topic I wanted to know about the debugging tools. Of course with ARDUINO IDE I can display comments via serial port but it's not a real tool for DEBUG.
It's sounds good but can you tell me with which probe (with which hardware tool), Visual micro is the software but what about the material ? ThankVisual micro has Debug capabilities with Teensy.
but PJRC nor anyone seen around here much uses it AFAIK. Just debug print spew and for the gifted a Logic Analyzer or O-Scope.
For example: see here https://github.com/luni64/VisualTeensy/releases/tag/v0.9.7.0 for some information, and mod links.
The video in the link from #13 shows debugging with with a hardware probe (JLink EDU). The mod link (the same as you linked above) shows how to modify a T3.6 board to be able to connect a SWD probe. This is not specific to the Eclipse IDE.For the software I think I'll have many solution but for the Hardware to use JTAG/SWD I have a doubt.
Sorry for my English but What do you mean IMHO ? What's the hardware probes you use with VisualCode ? Do you have a ref ?IMHO, these days the state of the art development system is PlatformIO using VisualCode which is perfectly able to debug using hardware probes.
Sorry for being sloppy. That means "in my humble opinion" and is just a disclaimer that I have no monopoly on truthWhat do you mean IMHO
What's the hardware probes you use with VisualCode
2- I buy a 'JLINK EDU' for segger for example and I use the VisualCode like software to communicate with this 'JLINK EDU'