faemagedon
New member
Hi I've been trying to run a library made with the faust IDE and keep getting this error on Teensy 3.5:
I'm using teensyduino as the IDE and including faust library.
Arduino: 1.8.13 (Mac OS X), TD: 1.53, Board: "Teensy 3.5, Serial, 120 MHz, Faster, US English"
/Applications/Teensyduino.app/Contents/Java/hardware/tools/arm/bin/../lib/gcc/arm-none-eabi/5.4.1/../../../../arm-none-eabi/bin/ld: /var/folders/xw/4_chkj0n4w58bfhrx_pb57pm0000gn/T/arduino_build_415137/sketch_may06a.ino.elf section `.bss' will not fit in region `RAM'
/Applications/Teensyduino.app/Contents/Java/hardware/tools/arm/bin/../lib/gcc/arm-none-eabi/5.4.1/../../../../arm-none-eabi/bin/ld: region `RAM' overflowed by 41148 bytes
collect2: error: ld returned 1 exit status
Multiple libraries were found for "SD.h"
Used: /Applications/Teensyduino.app/Contents/Java/hardware/teensy/avr/libraries/SD
Not used: /Applications/Teensyduino.app/Contents/Java/libraries/SD
Error compiling for board Teensy 3.5.
The code is as follows:
Any suggestions as to what I could do to remedy this error?
I'm using teensyduino as the IDE and including faust library.
Arduino: 1.8.13 (Mac OS X), TD: 1.53, Board: "Teensy 3.5, Serial, 120 MHz, Faster, US English"
/Applications/Teensyduino.app/Contents/Java/hardware/tools/arm/bin/../lib/gcc/arm-none-eabi/5.4.1/../../../../arm-none-eabi/bin/ld: /var/folders/xw/4_chkj0n4w58bfhrx_pb57pm0000gn/T/arduino_build_415137/sketch_may06a.ino.elf section `.bss' will not fit in region `RAM'
/Applications/Teensyduino.app/Contents/Java/hardware/tools/arm/bin/../lib/gcc/arm-none-eabi/5.4.1/../../../../arm-none-eabi/bin/ld: region `RAM' overflowed by 41148 bytes
collect2: error: ld returned 1 exit status
Multiple libraries were found for "SD.h"
Used: /Applications/Teensyduino.app/Contents/Java/hardware/teensy/avr/libraries/SD
Not used: /Applications/Teensyduino.app/Contents/Java/libraries/SD
Error compiling for board Teensy 3.5.
The code is as follows:
Code:
#include <Audio.h>
#include "AMSmallSynth.h"
// GUItool: begin automatically generated code
AMSmallSynth waveform1; //xy=345,257
AudioOutputAnalogStereo dacs1; //xy=577,253
AudioConnection patchCord1(waveform1, 0, dacs1, 0);
AudioConnection patchCord2(waveform1, 0, dacs1, 1);
AudioControlSGTL5000 audioShield; //xy=383,373
// GUItool: end automatically generated code
int buttonPinsOrange[] = {24, 25 ,26, 27};
int buttonPinsBlue[] = {28, 29, 30, 31};
byte currentPressOrange = 0;
byte currentPressBlue = 0;
int ledPinsBlue[] = {36, 37, 38, 39};
int ledPinsOrange[] = {32, 33, 34, 35};
float activeFrequency;
float octaveMultiplier = 1;
//float fundementals[] = {220, 220, 233.08, 246.94, 261.6, 277.18, 293.67, 311.13, 329.63, 349.23, 369.99, 392, 415.3, 440, 220, 220};
void setup() {
// put your setup code here, to run once:
for(int i = 0; i < 4; i++){
pinMode(buttonPinsOrange[i],OUTPUT);
pinMode(buttonPinsBlue[i],OUTPUT);
pinMode(ledPinsBlue[i], OUTPUT);
pinMode(ledPinsOrange[i], OUTPUT);
}
AudioMemory(127);
audioShield.enable();
audioShield.volume(0.1);
waveform1.setParamValue("gain",0.9);
// verb1.roomsize(0.2);
// verb1.damping(0.7);
//waveform1.setParamValue("duration",0.250);
}
void loop() {
// put your main code here, to run repeatedly:
currentPressOrange = readButtonPins(buttonPinsOrange);
currentPressBlue = readButtonPins(buttonPinsBlue);
writeLeds(currentPressBlue, currentPressOrange);
if (currentPressOrange == 0) {
activeFrequency = 0;
waveform1.setParamValue("trigger",0);
} else {
activeFrequency = octaveMultiplier * (fundementals[currentPressBlue]*pow(2,((currentPressOrange)-1)/12.));
waveform1.setParamValue("trigger",1);
}
waveform1.setParamValue("car_freq",activeFrequency);
while (currentPressOrange == 14) {
octaveMultiplier *= 2;
activeFrequency = 0;
delay(500);
break;
}
while (currentPressOrange == 15){
octaveMultiplier *= 0.5;
activeFrequency = 0;
delay(500);
break;
}
delay(50);
}
byte readButtonPins(int buttonPinsArr[]) {
byte r_press = 0;
for(int i = 0; i < 4; i++){
if (digitalRead(buttonPinsArr[i]) == HIGH){
bitWrite(r_press,i,1);
} else {
bitWrite(r_press,i,0);
}
}
return r_press;
}
void writeLeds(byte blue_press, byte orange_press){
for(int i = 0; i < 4; i++){
digitalWrite(ledPinsBlue[i],bitRead(blue_press,i));
digitalWrite(ledPinsOrange[i],bitRead(orange_press,i));
}
}
Any suggestions as to what I could do to remedy this error?