I made a Teensy 3.2 clone with a detachable bootloader. An all-around success.

Pea-Otter

Member
I wanted to be able to program multiple boards with just one bootloader, so I designed my own (2-layer) Teensy 3.2 with a detachable bootloader. Of course after accomplishing my goal, I decided to go with a completely different solution and decided to abandon this one. But this project was still an all-around success.

1.jpg
3.jpg
r8.png


Blinking two LEDs:

 
Last edited:
Reading hall effect sensors (using one or two multiplexers) embedded in an art installation/sculpture.
 
Last edited:
Back
Top