donperryjm
Well-known member
Is it possible to change this to this:
To this:
During runtime?
in one config the Audio is pushed to Filter, then amp, then USB +PEAK
the other config it's Amp then branch to USB...then filter then peak.
Code:
// GUItool: begin automatically generated code
AudioInputAnalog adc1x(A2); //xy=200.00001525878906,320.00000381469727
AudioAmplifier amp1L; //xy=389.00000762939453,341.0000057220459
AudioOutputUSB usb2; //xy=566.0000114440918,496.0000066757202
AudioFilterBiquad biquad1L; //xy=605.0000076293945,314.00000381469727
AudioAnalyzePeak peakL; //xy=813.0000114440918,308.00000381469727
AudioConnection patchCord1(adc1x, amp1L);
AudioConnection patchCord2(amp1L, 0, usb2, 0);
AudioConnection patchCord3(amp1L, 0, usb2, 1);
AudioConnection patchCord4(amp1L, biquad1L);
AudioConnection patchCord5(biquad1L, peakL);
// GUItool: end automatically generated code
To this:
Code:
// GUItool: begin automatically generated code
AudioInputAnalog adc1x(A2); //xy=120,232.00000381469727
AudioFilterBiquad biquad1L; //xy=321,171
AudioAmplifier amp1L; //xy=520.0000076293945,130.00000190734863
AudioAnalyzePeak peakL; //xy=710,122
AudioOutputUSB usb2; //xy=726.0000076293945,317.00000286102295
//AudioOutputAnalog dac1; //xy=821,245
AudioConnection patchCord1(adc1x, biquad1L);
AudioConnection patchCord2(biquad1L, amp1L);
AudioConnection patchCord3(amp1L, peakL);
AudioConnection patchCord4(amp1L, 0, usb2, 0);
AudioConnection patchCord5(amp1L, 0, usb2, 1);
//AudioConnection patchCord6(amp1L, dac1);
// GUItool: end automatically generated code
During runtime?
in one config the Audio is pushed to Filter, then amp, then USB +PEAK
the other config it's Amp then branch to USB...then filter then peak.