T3.2 hardware counter pin(s) and examples?

[DaQue]

I need to count pulses that won't be faster than 8khz. I Also need to trigger an interrupt after matching a programmed count. The count needs to be 16 bits. Any pins open for that not shared with the audio adapter?

 

[grease_lighting]

Just a count ? Not a frequency ? From the top of my head I believe the FTM clock inputs are on pins 0 & 1.

 

[DaQue]

Yup just need a count. The chip i am working with puts out a pulse and I need to count them and send a stop back to it after the count reaches a set amount. I looked at the docs again and the pulses only come once about every 250ms, not 8khz like I thought. 8khz was the rate it stores -analog voice input but it does it in 1/4 second buckets. The chip I am talking to a really odd chip form 2002 . ISD5116 SINGLE-CHIP VOICE RECORD/PLAYBACK DEVICE. Digikey was the only place I could find the datasheet.

 

[defragster]

For easy 4 Hz count this example looks like a good start: pjrc.com/threads/48101-PMT-pulse-counting-using-Teensy-3-2

You can ignore the priority setting if some nanoseconds doesn't hurt.