Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 5 of 5

Thread: Teensy DMX Shield

  1. #1

    Teensy DMX Shield

    Does anyone have a circuit for a DMX on Teensy Shield.
    I want to make a DMX sniffer that can read DMX commands to test a Artnet->DMX connection.
    The Arduino one would work, but I'd love to use the Teensy 4.1.
    This would only need to read, not write DMX so it unusual.
    Thanks,
    Simon

  2. #2
    Senior Member
    Join Date
    Mar 2017
    Location
    Oakland, CA, USA
    Posts
    319
    I use the RS485 backpack board from Bolder Flight Systems (bolderflight.com). Then I have a DMX plug I soldered to a connector that can plug onto the connector on the backpack. You might have to special order the board because I donít think they have them on their website anymore.

    Basically, all you need is an RS485-to-serial converter, so really anything that does that would work.

  3. #3
    Senior Member
    Join Date
    Jan 2015
    Location
    UK
    Posts
    174
    You can just use a RS485 breakout board like this one:

    https://www.sparkfun.com/products/10124

  4. #4
    Thanks for the data! I'll get right on it!

  5. #5
    Thanks. Love the Teensy 4.1 CAN Board BTW Got a nice CanOpen sniffer working!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •