Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 3 of 3

Thread: Teensy 2.0++, USB block ripped off. Alternate solder points?

  1. #1
    Junior Member
    Join Date
    Jan 2017
    Location
    Ottawa
    Posts
    13

    Teensy 2.0++, USB block ripped off. Alternate solder points?

    Hi I have an Azeron Key Pad. I incorrectly removed the Teensy 2.0++ and the USB block separated from the board.

    Are there alternate solder pads for the USB power and signal that I can solder a USB cable directly to?

    I searched the forum and site for some pictures and could not find any.

    Thanks in advance

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    24,784
    There aren't any extra solder pads on Teensy++ 2.0.

    Best option would be to try to solder to the ends of R1 and R2.

    https://www.pjrc.com/teensy/parts_pl...nsy2pp_top.png

  3. #3
    Junior Member
    Join Date
    Jan 2017
    Location
    Ottawa
    Posts
    13
    Quote Originally Posted by PaulStoffregen View Post
    There aren't any extra solder pads on Teensy++ 2.0.

    Best option would be to try to solder to the ends of R1 and R2.

    https://www.pjrc.com/teensy/parts_pl...nsy2pp_top.png
    Thank you Paul

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •