AaronVAudio
Member
Hi, I'm about to start my first build, a sample player in a footswitch. I have the majority of the parts already, and just have a couple questions as this is my first project with a Teensy.
First off, I purchased these to attach the Teensy and Audio Adaptor Board, and now that I have them, I'm completely at a loss as to how I'm supposed to solder anything between the two insulators. Am I supposed to be able to slide one of the insulators off and put it back on? https://www.pjrc.com/store/header_14x1_d.html
Secondly, I'm planning on using the line out, and very rarely if ever using the headphone jack. It seems like from what I've read that the volume control only effects the headphone jack, which is fine for my purposes. If I want to use that pin on the Teensy for something else, is it best to not solder it to the Audio Board? Could I then attach a physical volume control to the Audio Board for the occasional headphone jack use in the future, or is that pin on the Teensy required for the volume control to work?
First off, I purchased these to attach the Teensy and Audio Adaptor Board, and now that I have them, I'm completely at a loss as to how I'm supposed to solder anything between the two insulators. Am I supposed to be able to slide one of the insulators off and put it back on? https://www.pjrc.com/store/header_14x1_d.html
Secondly, I'm planning on using the line out, and very rarely if ever using the headphone jack. It seems like from what I've read that the volume control only effects the headphone jack, which is fine for my purposes. If I want to use that pin on the Teensy for something else, is it best to not solder it to the Audio Board? Could I then attach a physical volume control to the Audio Board for the occasional headphone jack use in the future, or is that pin on the Teensy required for the volume control to work?