Onboard R4 resistor gone

[gufo2k20]

Hi all,
looks like i've de-soldered my Teensy2 R4 resistor by mistake.......(yes, i'm not good at soldering).
Obviously, on-board LED doesn't work anymore, uploading some simple sketch looks ok.


Whato to do? I don't think shorting the terminal is a good idea....

 

[PaulStoffregen]

If pin 11 (D6) is still working, and you don't have the equipment for tiny surface mount soldering, maybe best to leave well enough alone. If you really need a LED, you can always just connect one externally with a normal size resistor.

 

[gufo2k20]

If pin 11 (D6) is still working, and you don't have the equipment for tiny surface mount soldering, maybe best to leave well enough alone. If you really need a LED, you can always just connect one externally with a normal size resistor.

no SMD soldering equipment (...already done enough damage with normal solder iron )
No need for LED with actual project, i'll test D6.

Thank you very much for the advice!