Austroteen
Member
Looking at the datasheet of the 1062 both USB seem to be the same electrical "things".
Only the shematic of the teensy 4.0 or 4.1 shows a difference in outside connection.
So VUSB und GND of USB 1 can be used as power supply whereby USB can put power on VUB (4.1).
But would it be possible to use USB1 as a host port if I seperate VUSB after programming?
I know this is a therotecial issue but what tells the teensy that USB 1 is a client? Is it the bootloader?
Thanks for the info!
Only the shematic of the teensy 4.0 or 4.1 shows a difference in outside connection.
So VUSB und GND of USB 1 can be used as power supply whereby USB can put power on VUB (4.1).
But would it be possible to use USB1 as a host port if I seperate VUSB after programming?
I know this is a therotecial issue but what tells the teensy that USB 1 is a client? Is it the bootloader?
Thanks for the info!