2 network adapters on 1 Teensy

Status
Not open for further replies.

olivierdemoustier

Active member
Hello, I need 2 network adapters (shields) connected to 1 Teensy.
One network will receive sACN (E131) and only 1 universe will be sent to the other network adapter. (can be artnet or also sACN)
The reason why I need this. We have a follow spot system that can't handle all the traffic on the current network.
I could do with 2 Arduino's. But traffic between the 2 Arduino's with "wire" would take at least 48milis.
Any help would be much apricated.
Ollie
 
Status
Not open for further replies.
Back
Top