Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 3 of 3

Thread: Teensy 4.1 native SPDIF out doen't synchronize

  1. #1

    Teensy 4.1 native SPDIF out doen't synchronize

    I tried 3 different devices (with 44.1kHz SR SPDIF in) to connect to the T 4.1. The best I got was some expected sound with lots of clicks and noise. The other 2 just produced noise. The same program worked with the T 4. What am I'm missing here?

  2. #2
    Senior Member
    Join Date
    Apr 2014
    Location
    Germany
    Posts
    9,585
    From that absolute minimal information nobody can answer it.
    The code is the same on T4/T4.1.
    Maybe the crystal is a bit off. It gets better when you cool or heat the teensy, it's a crystal problem.
    Or just a electrical problem.

  3. #3
    The problem went away, as soon as I removed the delay from the design.Although the USB had no real problems (besides the usual clicks), the SPDIF went bonkers. Without delay: no problem. Thanks Frank.
    (I'm aware,that my information was a little vague, but I didn't want to paste 30000 lines of code here). My program is not only a 6 voice synth, but also a sophisticated MIDI controller.)
    Anyway, good to know, it's not a HW issue.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •