I have this stepper motor Lin engineering 3809Z-45, which is rather similar to this one:
https://lin-web.s3.amazonaws.com/downloads/products/hybrid-stepper-motors/3809/WO-3809Z-14/WO-3809Z-14%20Datasheet.pdf
stepper motor:
Red(A+ Phase)
Blue (A- Phase)
Green (B+ Phase)
Black (B- Phase)
--
I'm using an A4988 driver, and it has wiring for these pins:
1A
2A
1B
2B
![A4988-Connections-pinout-microstepping-pins.png A4988-Connections-pinout-microstepping-pins.png](https://forum.pjrc.com/data/attachments/23/23798-cd89e70cb87877f259520c84d28265f9.jpg)
Is it?:
A+ -> 1A
A- -> 2A
B+ -> 1B
B- -> 2B
I don't know much about stepper motors, and I'm looking at just getting the stepper to change positions every so often. I have the 2 power supplies and hoping not to blow anything up in wiring stuff.
Maybe it's not a concern to mis-wire these points? If so, I could try different combinations. thanks in advance for any guidance.
https://lin-web.s3.amazonaws.com/downloads/products/hybrid-stepper-motors/3809/WO-3809Z-14/WO-3809Z-14%20Datasheet.pdf
stepper motor:
Red(A+ Phase)
Blue (A- Phase)
Green (B+ Phase)
Black (B- Phase)
--
I'm using an A4988 driver, and it has wiring for these pins:
1A
2A
1B
2B
![A4988-Connections-pinout-microstepping-pins.png A4988-Connections-pinout-microstepping-pins.png](https://forum.pjrc.com/data/attachments/23/23798-cd89e70cb87877f259520c84d28265f9.jpg)
Is it?:
A+ -> 1A
A- -> 2A
B+ -> 1B
B- -> 2B
I don't know much about stepper motors, and I'm looking at just getting the stepper to change positions every so often. I have the 2 power supplies and hoping not to blow anything up in wiring stuff.
Maybe it's not a concern to mis-wire these points? If so, I could try different combinations. thanks in advance for any guidance.