I've ran across the old thread here but it's over a year since the last reply so I'll leave it dead. Anyhow what I really wanted to do is find a way to use a Teensy 4.1 as the motioncotroller for LinuxCNC. Closest project I found that isn't in danger of dying off is Remora https://github.com/scottalford75/Remora
It's my understanding that the problem using a Teensy 4.x with Remora is that it's based on mbedos and the 4.x is not supported in mbedos. If it doesn't involve copying and pasting I can't program it so porting mbedos to a Teensy isn't something I can do, I do hardware, not code. I'm just curious if there's anyone working on it or is interested in doing so.
It's my understanding that the problem using a Teensy 4.x with Remora is that it's based on mbedos and the 4.x is not supported in mbedos. If it doesn't involve copying and pasting I can't program it so porting mbedos to a Teensy isn't something I can do, I do hardware, not code. I'm just curious if there's anyone working on it or is interested in doing so.