At this page: https://www.pjrc.com/teensy/td_uart.html
there is a nice table showing the baud rate errors for various Teensy boards. Absent is a column for the Teensy 4.0/4.1.
Any one know how to calculate the baud rate error for a Teensy 4.x? Is it identical to another board?
I am having sporadic errors with reading data from a Lidar operating at 230,400 baud.
I have increased the buffer size for the Serial read function and that may have helped a bit.
I am wondering if the baud rate might be different between the Lidar and the Teensy.
The data stream is running close to 100% bandwidth so a mismatch might be an issue.
there is a nice table showing the baud rate errors for various Teensy boards. Absent is a column for the Teensy 4.0/4.1.
Any one know how to calculate the baud rate error for a Teensy 4.x? Is it identical to another board?
I am having sporadic errors with reading data from a Lidar operating at 230,400 baud.
I have increased the buffer size for the Serial read function and that may have helped a bit.
I am wondering if the baud rate might be different between the Lidar and the Teensy.
The data stream is running close to 100% bandwidth so a mismatch might be an issue.