Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Teensy 4.x with Industrial-Temp iMXRT1062

  1. #1

    Teensy 4.x with Industrial-Temp iMXRT1062

    Teensy 4.x uses the "D" (Commercial, 0 to 95C) variant of the 1062. If designing a custom PCB, can the "C" (Industrial, -40 to 105C) variant be used with no effect on software? If so, would PJRC be willing to provide an option for the Industrial-Temp variant?

  2. #2
    Senior Member brtaylor's Avatar
    Join Date
    Mar 2016
    Location
    Santa Fe, NM
    Posts
    764
    I had asked in this thread:
    https://forum.pjrc.com/threads/63816-Mimxrt1062dvj6a

    Paul guessed that it would work and that they might even be the same chip and just binned differently. I will be designing some boards around the MIMXRT1062CVJ5B "soon" and will post here regarding success / failure when I do. Those are custom boards, of course, I can't speak to whether they would be an option for a stock Teensy 4.1. I have a few MIMXRT1062CVJ5B I could send anyone that is wanting to test the industrial temp version in the next couple months and willing to report back results.

  3. #3
    Thanks. I should have searched more. Will let you know if we decide to go this route. Remember the days when you could actually call an applications engineer at a chip manufacturer and get an answer to a question like this?

  4. #4
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    26,224
    If it does work, remember to set Tools > CPU Speed to 528 MHz (or less) since the industrial temp version is only rated for 528 MHz.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •