serkaneray
New member
I designed my own Teensy Board to use the Teensy 3.1 infrastructure.
I followed Paul's instructions while performing the design. [https://www.pjrc.com/store/ic_mkl02.html]
I know there is no design sound.
Do I need to see any voltage at the oscillator pins of the MK20 chip? When I look through the oscilloscope, I can't see any DC voltage output.
I followed Paul's instructions while performing the design. [https://www.pjrc.com/store/ic_mkl02.html]
I know there is no design sound.
Do I need to see any voltage at the oscillator pins of the MK20 chip? When I look through the oscilloscope, I can't see any DC voltage output.
Last edited: