Teensy 3.2 pt8211 with OLED SSD1306

[hannathayyil]

Hi everyone!

I'm working on an Audio Project and using the pt8211 with Teensy 3.2 for 16 bit audio. I'm also using an OLED 128x32 screen. I tested the pt8211 using the example hardware test sketch and all works/sounds fine, the OLED is also working fine, and displaying as it should. The oled is wired to pins 18 and 19 for sda/scl and uses the wire library. The problem I'm having is when I use these two together the audio out is very distorted. If I comment out my code for the display the Audio sounds fine, so im guessing its some data transmission issues. I've attached my code. Any way around this?

[rcarr]

Try removing AudioNoInterrupts(); from your loop. You need to let the audio processing happen in the background while you write the display.