I'm new to Teensy 4.1, and have a board with Ethernet(Teensy41-Pins, Ethernet Kit and Cables. I'm very impressed with it's performance. I see in the datasheet it shows the processor is rated from 0-95C. I'm really looking for something on the lower end (at least down to -20C(where it can startup and operate)) and saw there are other processors available within the same family, that can do -40C to 105C/125C. Do you have any plans to make a Teensy board 4.1+ that is -40 to 105C or -40 to 125C? I did search the forum and saw the Teensy 3.x discussion on the temperature range down to a lower range, but would like to stay with the 4.1 board. I can swap out crystals, etc without issue, but want to drop your Teensy 4.1 (as is) onto my PCB (that handles Field wiring, 24Vdc Isolated IO, 0-36Vdc 16bit/Analog In, etc). Do you think the Teensy 4.1 would work -20C to 85C? My PCB, that they Teensy 4.1 would plug into would also do Ethernet to Isolated Serial Conversion. Thanks!
Can the Teensy 4.1 startup and operate below 0C?
- Thread starter GregB
- Start date