Hi all,
I've now published my Kicad schematic and board files for making a custom T4.1 on https://github.com/jenschr/Teensy-4.1-example
This file has a known bug in that it turns the USB switch for the USB host feature off when it should be turned on. The part I used was dictated by the parts shortage, so you may want to change that part anyway.
Here are repositories for my other Teensy schematics:
T3.2 example files https://github.com/jenschr/Teensy3.2-example/
T3.6 example files https://github.com/jenschr/Teensy3.6-example/
My USB Type C connector repo may also be interesting:
https://github.com/jenschr/USB-C-Connectors
As you can see, the board is quite a bit larger than Paul's highly optimized board but this was sufficient for my purpose and 4 layer setup. Feel free to post pictures here if you use this as a basis for your own designs!
I've now published my Kicad schematic and board files for making a custom T4.1 on https://github.com/jenschr/Teensy-4.1-example
This file has a known bug in that it turns the USB switch for the USB host feature off when it should be turned on. The part I used was dictated by the parts shortage, so you may want to change that part anyway.
Here are repositories for my other Teensy schematics:
T3.2 example files https://github.com/jenschr/Teensy3.2-example/
T3.6 example files https://github.com/jenschr/Teensy3.6-example/
My USB Type C connector repo may also be interesting:
https://github.com/jenschr/USB-C-Connectors
As you can see, the board is quite a bit larger than Paul's highly optimized board but this was sufficient for my purpose and 4 layer setup. Feel free to post pictures here if you use this as a basis for your own designs!
Last edited: