Hi
I discovered the following situation:
- There is an interrupt missing, when I combine a "1" micro second interrupt and a Serial.print. Take a look at the picture.
- with the delay it is possible to move the position.
- taking out the print command all interrupts show up
I downloaded: https://github.com/luni64/TeensyTimerTool
using PeriodicTimer t1(PIT);
Compliling for: Teensy 4.0, 600MHz, fast
- the frequency and option have no influence
I'm convinced the problem is somewhere in the timer or print lib. Unfourtuntely I have no clue how to fix that.
Andre
I discovered the following situation:
- There is an interrupt missing, when I combine a "1" micro second interrupt and a Serial.print. Take a look at the picture.
- with the delay it is possible to move the position.
- taking out the print command all interrupts show up
I downloaded: https://github.com/luni64/TeensyTimerTool
using PeriodicTimer t1(PIT);
Compliling for: Teensy 4.0, 600MHz, fast
- the frequency and option have no influence
I'm convinced the problem is somewhere in the timer or print lib. Unfourtuntely I have no clue how to fix that.
Andre