Hello,
I have a BMP280 barometric pressure sensor and Teensy 3.6. I want to use this library: https://github.com/adafruit/Adafruit_BMP280_Library
When I use pins 18 and 19 there is no problem, but it doesn't work when I use pins 38 and 38.
I encountered the same problem when I was using <Wire.h> library but solved it by using this library instead of <Wire.h>: https://github.com/nox771/i2c_t3
But I don't know know how can I use Adafruit libraries with non default I2C pins on Teensy 3.6.
I am sorry if there is something missing in the post and thank you in advance.
I have a BMP280 barometric pressure sensor and Teensy 3.6. I want to use this library: https://github.com/adafruit/Adafruit_BMP280_Library
When I use pins 18 and 19 there is no problem, but it doesn't work when I use pins 38 and 38.
I encountered the same problem when I was using <Wire.h> library but solved it by using this library instead of <Wire.h>: https://github.com/nox771/i2c_t3
But I don't know know how can I use Adafruit libraries with non default I2C pins on Teensy 3.6.
I am sorry if there is something missing in the post and thank you in advance.