AzureLightPKK
New member
Hello. I'm a complete newbie when it comes to Arduino and Teensy and would very much appreciate some assistance on a project I'm trying to do.
This is the video of what I'm following and trying to accomplish.
https://www.youtube.com/watch?v=dI6ielrP1SE
and his code is here: https://github.com/playfultechnology/audio-guestbook
My issue is that when I turn on the Teensy nothing happens. I am uncertain whether most of the cables are soldered to the appropriate pins. I'm only certain that the speaker wires are in the right place and the speaker definitely works...
I'm not sure where to see error messages if there are any.
Wiring-wise, I've tried my best to imitate his. https://github.com/playfultechnology/audio-guestbook/blob/main/AudioGuestbook_bb.jpg
I am using Arduino 1.8.19 and the Teensy 4.0 along with the audio shield.
Please let me know what other information I would need to provide to assist me.
Thank you.
This is the video of what I'm following and trying to accomplish.
https://www.youtube.com/watch?v=dI6ielrP1SE
and his code is here: https://github.com/playfultechnology/audio-guestbook
My issue is that when I turn on the Teensy nothing happens. I am uncertain whether most of the cables are soldered to the appropriate pins. I'm only certain that the speaker wires are in the right place and the speaker definitely works...
I'm not sure where to see error messages if there are any.
Wiring-wise, I've tried my best to imitate his. https://github.com/playfultechnology/audio-guestbook/blob/main/AudioGuestbook_bb.jpg
I am using Arduino 1.8.19 and the Teensy 4.0 along with the audio shield.
Please let me know what other information I would need to provide to assist me.
Thank you.