I am currently working on a custom board for the teensy 4.1, but have been having issues getting the main chip to start correctly. The issue I am having is the oscillator for 24 MHz is not being driven by the chip just getting a flat 400 mV on the pads for the oscillator and the 4 blinks from the bootloader that jtag is not responding. The startup sequence seems to be correct as I am getting PMIC_ON_REQ and that is enabling my 3.3V regulator. I am also getting my 1.5~ V out of the cpu on VDD_SOC_IN. I ask that you forgive if I have left off some relevant information but I am quite new to the whole forum thing.
Here is the schematic for the board.
Here is the schematic for the board.