Hi.
Is there any way to get the super cool FreqMeasure library working on the Arduino MKR Zero (Cortex-M0, 32 Bit, SAMD21) ?
I would like to measure near (EMF/HF) fields via an antenna and it worked very well on the Arduino Nano. I still have Teensy 3.6 here too, but the library (FreqMeasure) doesn't run with it.
Arduino IDE error: capture_read' was not declared in this scope
capture = capture_read();
FreqCount and FreqMeasureMulti library works.
However, FreqCount AND FreqMeasureMulti does not measure like FreqMeasure. That's why it become "uninteresting".
I wanted to have a controller with SD card and I2S. That's why I took the MKR Zero now.
Maybe someone can help me to find a suitable frequency measurement library
Greeting
Tim
Is there any way to get the super cool FreqMeasure library working on the Arduino MKR Zero (Cortex-M0, 32 Bit, SAMD21) ?
I would like to measure near (EMF/HF) fields via an antenna and it worked very well on the Arduino Nano. I still have Teensy 3.6 here too, but the library (FreqMeasure) doesn't run with it.
Arduino IDE error: capture_read' was not declared in this scope
capture = capture_read();
FreqCount and FreqMeasureMulti library works.
However, FreqCount AND FreqMeasureMulti does not measure like FreqMeasure. That's why it become "uninteresting".
I wanted to have a controller with SD card and I2S. That's why I took the MKR Zero now.
Maybe someone can help me to find a suitable frequency measurement library
Greeting
Tim