RichardFerraro
Well-known member
I have purchased and used around 50 Teensy 4.0 and even more 4.1, 3.2, 3.6's over the years.
I have not encountered this problem. The T4.0 is running my program and outputs/inputs correctly to/from the serial console.
While running this software (that the other T4.0's before and since run just fine), it stopped allowing upload. The T4.0 is not mounted in any system and there are no connections to it besides the usb micro. The red led blinks two fast, then pause, two fast....
thanks,
Richard
C:\Teensy\TyCommanderC.exe upload --autostart --wait --multi C:\Users\Richa\AppData\Local\Temp\arduino_build_615848/HelloWorld.ino.TEENSY40.hex
Waiting for user selection
upload@12276460-Teensy Uploading to board '12276460-Teensy' (Teensy 4.0)
upload@12276460-Teensy Triggering board reboot
upload@12276460-Teensy Reboot didn't work, press button manually
I have not encountered this problem. The T4.0 is running my program and outputs/inputs correctly to/from the serial console.
While running this software (that the other T4.0's before and since run just fine), it stopped allowing upload. The T4.0 is not mounted in any system and there are no connections to it besides the usb micro. The red led blinks two fast, then pause, two fast....
thanks,
Richard
C:\Teensy\TyCommanderC.exe upload --autostart --wait --multi C:\Users\Richa\AppData\Local\Temp\arduino_build_615848/HelloWorld.ino.TEENSY40.hex
Waiting for user selection
upload@12276460-Teensy Uploading to board '12276460-Teensy' (Teensy 4.0)
upload@12276460-Teensy Triggering board reboot
upload@12276460-Teensy Reboot didn't work, press button manually