Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 3 of 3

Thread: Teensy 4.1 guidance

  1. #1
    Senior Member Davidelvig's Avatar
    Join Date
    Aug 2015
    Location
    Wisconsin
    Posts
    345

    Teensy 4.1 guidance

    I've made good use of the 3.2 architecture - moving from Teensy 3.2 board to custom board with Teensy boot loader.
    Needing more capacity, I'd like to consider doing the same with the 4.1.

    I'd get some 4.1 boards for prototyping and boot loaders for production.

    I see MIMXRT1062DVJ6B on the schematic.

    This particular chip is hard to find (on Mouser and DigiKey) and is not specifically available on the board house I've used (JLCPB.com)

    Are there variants of this Cortex M7 that would work?
    Any with pins instead of BGA

    Thanks

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    27,085
    We have about a dozen leftover RT1062 chips (the one used on Teensy 4.1). If those would help, email me directly.

  3. #3
    Senior Member Davidelvig's Avatar
    Join Date
    Aug 2015
    Location
    Wisconsin
    Posts
    345
    Thanks, Paul.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •