Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: 3.6 USB MIDI host to 5 pin adapter

  1. #1

    3.6 USB MIDI host to 5 pin adapter

    Hey folks, I have a teensy 3.6 board and a couple panel mount 5 pin DINs. I would like to build an adapter that will take MIDI over USB messages from my teensy based synths (USB midi only) to my korg ms 20 (MIDI 5 pin DIN). I suspect this project has been done before, anyone have some source code they are willing to share? I found some raspberry PI examples online but rather not go that route if I dont have to.

  2. #2
    Senior Member
    Join Date
    Apr 2020
    Location
    DFW area in Texas
    Posts
    511
    Quote Originally Posted by colorado_hick View Post
    Hey folks, I have a teensy 3.6 board and a couple panel mount 5 pin DINs. I would like to build an adapter that will take MIDI over USB messages from my teensy based synths (USB midi only) to my korg ms 20 (MIDI 5 pin DIN). I suspect this project has been done before, anyone have some source code they are willing to share? I found some raspberry PI examples online but rather not go that route if I dont have to.
    @colorado_hick:

    I have done what I believe that you are asking about using the T4.x as described in p#2 <this thread> . . . see if that helps. If not, feel free to ask more questions.

    Mark J Culross
    KD5RXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •