Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Hardware design with MIMXRT1062CVL5B and Teensy4.x Bootloader chip.

  1. #1
    Junior Member
    Join Date
    Jan 2023
    Posts
    1

    Hardware design with MIMXRT1062CVL5B and Teensy4.x Bootloader chip.

    Hi.

    We are developing firmware with teensy4.1.

    Because of the operating temperature characteristics, the teensy4.1 board cannot be used, so we are trying to design hardware with the MIMXRT1062CVL5B chip and Teensy4.x Bootloader chip.

    Accoding to this post https://forum.pjrc.com/threads/70793-Integrate-Teensy-4-1-design-on-custom-PCB, i think it's possible.

    Has anyone tested it?

    Thanks in advance.

  2. #2
    Senior Member
    Join Date
    Apr 2020
    Location
    DFW area in Texas
    Posts
    542
    [ never mind . . . I tried to direct you to the same post that you had already quoted . . . DOH !! ]

    Mark J Culross
    KD5RXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •