header for Teensy 4.0 pins 24-33

[Boothby]

For the 2x5 SMD pads on the Teeny4.0, was it designed for a specific header and if so, whos (molex, samtec)? Most parts i have reviewed have the pins you solder exceeding the lengths of the pads (2.794mm). Thanks

 

[TomChiron]

It is part of the Teensy header kit:

https://www.sparkfun.com/products/13925

 

[skpang]

Its a Molex part : 15-91-0100

https://www.mouser.co.uk/ProductDetail/Molex/15-91-0100?qs=UZEkBKezw1bF/z6q/FjjLA==

 

[MichaelMeissner]

It is part of the Teensy header kit:

https://www.sparkfun.com/products/13925

Though note, the Teensy 3.1/3.2 had 7 x 2 pins, while the Teensy 4.0 has 5 x 2 pins. You would have to remove 2x2 pins from SMT header before using it with the Teensy 4.0.

 

[Boothby]

It is part of the Teensy header kit:

https://www.sparkfun.com/products/13925

Verified the step model. Thank you! appreciate you.