I am trying to use my Teensy 3.2 /4.0 as webserver. I would like to use teensy 3.2/4.0 instead of 4.1. Unlike the esp32 teensy don't have built in wifi so I have been thinking of using a xbee to connect to a wifi. I believe the following steps are required to do so;
For #2 on the list above, I think I can connect using either serial port or if I use Teensy 4, then I can use the USB port.
Not sure how to do #3 from the list! For ESP32 the libraries <WiFi.h> and<WebServer.h> seems to do all the work that is needed.
What can be done for teensy?
Thanks
- Configure the Xbee to connect to your Wi-Fi network.
- Connect the Xbee to Teensy.
- Direct teensy to the wired connection for internet access.
For #2 on the list above, I think I can connect using either serial port or if I use Teensy 4, then I can use the USB port.
Not sure how to do #3 from the list! For ESP32 the libraries <WiFi.h> and<WebServer.h> seems to do all the work that is needed.
What can be done for teensy?
Thanks