Teensy 4.1 to art-net node for large 10,000 WS2815 12v project.

Paul Holliday

New member
Hey guys,
We have built this huge art piece for our charity. 26 individual heptagon arches. We are running LED strips on the inside of each of the arches and want to control them with teensy 4.1 as an art-net node using madmapper software.
We have experience with ESP32 boards but we’ve never used Teensy 4.1. We are using 12v WS2815’s, 385 pixels per arch with a total of 10,010 pixels.
We are powering every two arches with 12v batteries, because we have no direct power to the land.
Is there any teensy genius out there who could help us with the requirements of this project.
Huge thanks in advance 🙏🏼
 
Back
Top