OnixIsThePewterGod
Member
From my original email to Paul:
https://drive.google.com/file/d/1PQAKS59tvtcgTyPdpVtSjnxV05DbNbP2/view?usp=share_link
https://drive.google.com/file/d/1uJMRNi4fxqxA_8nTNKRCmPpcOYVqSdsf/view?usp=share_link
https://drive.google.com/file/d/1hObhr3IARKlCpHufd7sX26tBVY8FWKKz/view?usp=share_link
https://drive.google.com/file/d/15sNiyw6-lj2lK06kPGAfFUZKYGPSpICL/view?usp=share_link
Could you guys help me out? I will get it sent to PJRC if you are out of ideas.Around a month or two ago I took my Teensy 4.1 to school with me to show others. One boy grabbed it from me and proceeded to damage it on the ground with his foot. The board sustained lots of scratches, particularly on the topside. I don't know if any circuit parts were seriously damaged.
The T4.1 was still working after, until now when I tried using it again and it just stopped working properly. When I connect the board, it does not show in the Arduino IDE and shows as "SE Blank RT Family" in Device Manager. The board flashes the red LED three times when I push the (now mostly grinded off) Program button. I can't even do a 15 second restore; the red LED just flashes once at the beginning of the window.
Do I have a hardware problem with my Teensy 4.1? Any possible flash issues? If there are any serious problems, I already know where to send my board.
https://drive.google.com/file/d/1PQAKS59tvtcgTyPdpVtSjnxV05DbNbP2/view?usp=share_link
https://drive.google.com/file/d/1uJMRNi4fxqxA_8nTNKRCmPpcOYVqSdsf/view?usp=share_link
https://drive.google.com/file/d/1hObhr3IARKlCpHufd7sX26tBVY8FWKKz/view?usp=share_link
https://drive.google.com/file/d/15sNiyw6-lj2lK06kPGAfFUZKYGPSpICL/view?usp=share_link