tomwithoutjerry
New member
Hello, I tried to create an option for only mouse and serial by editing the usb_desc.h and boards.txt, however the issue is I still see two HID-compliant mouse
Here's what I changed in usb_desc.h:
for boards.txt:
I could upload the code and everything is working but I still two HID in device manager, I want to disable the one I'm not using.
Here's what I changed in usb_desc.h:
Code:
#elif defined(USB_SERIAL_MOUSE)
#define VENDOR_ID 0x16C0
#define PRODUCT_ID 0x0487
#define DEVICE_CLASS 0xEF
#define DEVICE_SUBCLASS 0x02
#define DEVICE_PROTOCOL 0x01
#define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
#define MANUFACTURER_NAME_LEN 11
#define PRODUCT_NAME {'S','e','r','i','a','l','/','M','o','u','s','e'}
#define PRODUCT_NAME_LEN 12
#define EP0_SIZE 64
#define NUM_ENDPOINTS 4
#define NUM_INTERFACE 3
#define CDC_IAD_DESCRIPTOR 1
#define CDC_STATUS_INTERFACE 0
#define CDC_DATA_INTERFACE 1 // Serial
#define CDC_ACM_ENDPOINT 1
#define CDC_RX_ENDPOINT 2
#define CDC_TX_ENDPOINT 2
#define CDC_ACM_SIZE 16
#define CDC_RX_SIZE_480 512
#define CDC_TX_SIZE_480 512
#define CDC_RX_SIZE_12 64
#define CDC_TX_SIZE_12 64
#define MOUSE_INTERFACE 2 // Mouse
#define MOUSE_ENDPOINT 3
#define MOUSE_SIZE 8
#define MOUSE_INTERVAL 2
#define ENDPOINT1_CONFIG ENDPOINT_RECEIVE_UNUSED + ENDPOINT_TRANSMIT_INTERRUPT
#define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_BULK + ENDPOINT_TRANSMIT_BULK
#define ENDPOINT3_CONFIG ENDPOINT_RECEIVE_UNUSED + ENDPOINT_TRANSMIT_INTERRUPT
Code:
teensy41.menu.usb.mouse=Mouse
teensy41.menu.usb.mouse.build.usbtype=USB_SERIAL_MOUSE
teensy41.menu.usb.mouse.upload_port.usbtype=USB_SERIAL_MOUSE