Eagle library with Teensy 3.0 footprint

Status
Not open for further replies.
OK, here is a Eagle library update with a preliminary addition of the 3.5 and 3.6 series teensy boards. If someone could have a look at them to see if they match up, that would be great.

Constantin, I just found a problem:

Your pin called VUSB1 (on the USB-connector) is NOT connected to VUSB on the T3.6 - I fear this can lead to heavy problems.. i'd choose an other name (5VOut?) and disconnect both in the library.
 
Hi Constantin, thank you for your eagle files. I am routing boards which use Teensy 3.2 and maybe because of my age (74) and eyes could really use bigger pads. I did spend some time trying to see if I could edit the board file myself but either because I'm using the free Eagle (for small boards) or I'm not smart enough, I couldn't make it work. I can use the library for a dip socket but it would be much nicer to use your schematic.

Is this something that is difficult to change?

john ferguson
 
Status
Not open for further replies.
Back
Top