Thanks for reply, I was under the assumption pins 0-12 are PWM pins able to receive PWM signals , thus I connected PWM wire of servo motor to it . I’ve always used those pins, even to operate 4 servos at a time. I left only the servo PWM pin...
So I left the minilab past Friday in a rush for a weekend trip, left the teensy in the breadboard with a wire connected from GND to GND rail on breadboard, and a loose PWM wire on pin 8 that was connected to a motor , no power being supplied...
Hi Paul, thank you very much for the reply. I was able to give it a good cleaning with the available resources I had at hand. Never knew an orange light can give me so much joy ! Back to the tutorials now
Complete abomination of a solder job on a Teensy 4.1. I am extremely mechanically inclined but I have puny electrical knowledge, bought my very first microcontroller and decided to solder some pins to it so I can rack it up to a breadboard, my...