If you ever want to build an enclosure for your Teensy project, one easy way to go is to design it in SketchUp, export as stl and print on a 3D printer.
This is a quick job; since I did not know the exact components used by PJRC, I reused existing ones (i.e. micro-usb, LQFP64...): enough to design enclosures.
Here attached are 3 versions of the Teensy 3.1 module:
- Module (Teensy-3.1.skp)
- Module with pins (Teensy-3.1-pins.skp)
- Module with all the pins, including the bottom ones (Teensy-3.1-all-pins.skp)
Laurent
This is a quick job; since I did not know the exact components used by PJRC, I reused existing ones (i.e. micro-usb, LQFP64...): enough to design enclosures.
Here attached are 3 versions of the Teensy 3.1 module:
- Module (Teensy-3.1.skp)
- Module with pins (Teensy-3.1-pins.skp)
- Module with all the pins, including the bottom ones (Teensy-3.1-all-pins.skp)
Laurent