jensa

Worked like a charm! Thanks! Might be useful to add that one to the blink codes if you sometime in the future edit https://www.pjrc.com/store/ic_mkl02_t4.html for other reasons? Didn't strike me to look at the Pinout ;-)

That looks like the slow blink for successfully entered bootloader mode, but no USB communication has been heard from your PC. It's mainly meant to help detect charge-only USB cables that have the 2 power wires but lack the 2 data wires. If you...

Hi, The list of blink codes is incredibly helpful when bringing up new boards. For a recent project, I've been through a surprising amount of error codes. This is mostly down to soldering issues, but I've used these footprints on many hundred...

Yes, the IMXRT fuse memory absolutely is permanent. Setting a fuse bit physically alters the chip in an irreversible way. NXP doesn't give details of how it's implemented, but the on-chip technology is likely amorphous silicon anti-fuse. The...

Hi all, I'm making a custom board and want to protect the firmware. The process is explained well for boards made by PJRC, but in my case I'm buying the core parts from PJRC and putting them on my own boards. I asked PJRC the following: So just...