smarrocco

Thank you, Paul.

This is all good info, thank you all. When you are all mentioning the "online card" (https://www.pjrc.com/store/teensy40.html#pins), I can see that that has a correction at the bottom. The page to which I'm referring...

Thank you Michael. Knowing that the pinouts between the T4 and T4.1 are the same helps. Yes, I figured that the cards sent out to people could not be updated automatically ;) In addition to the updating of the web page info, a couple other...

Looking at the documentation for the Teensy 4.0 pinouts on https://www.pjrc.com/teensy/pinout.html, there appears to be a few missing: MISO 1 (MISO and MISO2 are present) CS1 (CS and CS2 are present) Alternates for the SPI pins do not appear...

(looks up vibration switches....) That looks more like what I should be using. Thank you. I've spend a lot of time looking for 'motion detection' devices and it all seemed like overkill. What I really needed was to look for 'vibration' sensors...

I am working on a replacement remote control for my media devices. I'd like my Teensy 4 to be in a low power state as possible until it is moved. I see many motion detections devices out there for detecting north, gps and acceleration, etc. I'm...