S

stiebs

New member
Joined
Last seen
Messages
3
Reaction score
0

Latest activity Postings About

    • S
      stiebs replied to the thread How low can I go (mA)?.
      Further update on some testing.. The PowerBoost 500C draws 4mA from the battery in its default state of ON but with no load connected. If I pull the EN pin low, power consumption drops to 13uA. With the TeensyLC and LCD screen powered on, the...
    • S
      stiebs replied to the thread How low can I go (mA)?.
      I was thinking of a way to turn off the PowerBoost output from the Teensy, but I'm not sure how I could do that.. The PowerBoost output is enabled by default, with its EN pin by default pulled high. The pin needs to be connect to GND to turn off...
    • S
      stiebs posted the thread How low can I go (mA)? in Project Guidance.
      I'm building a relatively simple project that includes a TeensyLC, a Waveshare 1.6" LCD screen (https://www.waveshare.com/wiki/1.69inch_LCD_Module), three buttons, and an ADC (possibly onboard, but likely and ADS1115). For power, I have a 400mA...
    Show older items
  • Loading…
  • Loading…
Back
Top