Hi All,
I don't know where to post this question because it's not really relevant to Teensy at all but I desperately need some help.
Currently, I'm working on a school project that needs to work with a 8x8 RGB LED Matrix as shown in the schematic below
Now, if I want to light up these 2 circled LEDs as shown below. How can I do this?
By commonsense, you will say assert a 1 on pin 17 and 18, assert a 0 on pin 9 and 10. But with that settings, 4 LEDs will be lit up not just 2 as shown in the following picture...
I don't really know how to resolve this issue in theory..
Please help me.
I don't know where to post this question because it's not really relevant to Teensy at all but I desperately need some help.
Currently, I'm working on a school project that needs to work with a 8x8 RGB LED Matrix as shown in the schematic below
Now, if I want to light up these 2 circled LEDs as shown below. How can I do this?
By commonsense, you will say assert a 1 on pin 17 and 18, assert a 0 on pin 9 and 10. But with that settings, 4 LEDs will be lit up not just 2 as shown in the following picture...
I don't really know how to resolve this issue in theory..
Please help me.